Fabrice Schmidt




Professeur à l'Ecole Nationale Supérieure des Mines d'Albi-Carmaux (Mines Albi)
Membre du groupe Matériaux et Structures Composites (MSC)



Activités de recherche


My research activities are at the crossing point between polymer processing, mechanics, radiation heat transfer, numerical modelling, … Infrared heating modelling using ray tracing method is one of my major interest. In addition, I try to promote the use of Boundary Element Method (BEM) in order to simulate liquid composites infusion, heat transfer…


Activités d'enseignement

Year

Course title

L3

Fluid and Solid Mechanics

M1

Radiative Transfer Practice

M2

Numerical Modelling of polymeric Fluids, Process & Properties of Polymer & Composites



Responsabilités collectives

Since September 2016: Head of Advanced Master - Manufacturing Processes for Aeronautical Structures (AMPAS)
Coordinator since 2007 of mini-symposium "Structures and Processing of Polymers and Biomass Based Materials" at international conference ESAFORM

Production scientifique

148 contributions

Article de revue internationale avec comité de lecture

[ACL1]A.C. Akué Asseko , B. Cosson , &. Lafranche, F. Schmidt and Y. Le Maoult. Effect of the developed temperature field on the molecular interdiffusion at the interface in infrared welding of polycarbonate composites. Composites Part B: Engineering. 97(15)53-61. 2016 [DOI]
[ACL2]M.-Q. Thai, F. Schmidt, G. Dusserre, A. Cantarel and L. Silva. BEM computation of 3D Stokes flow including moving front. International Journal of Material Forming. , . 2016 [DOI]
[ACL3]A.-C. Akue Asseko, B. Cosson, F. Schmidt, Y. Le Maoult, R. Gilblas and E. Lafranche. Laser transmission welding of composites – Part B: Experimental validation of numerical model. Infrared Physics and Technology. 23, 304-311. 2015 [DOI]
[ACL4]A.-C. Akue Asseko, B. Cosson, M. Deleglise, F. Schmidt, Y. Le Maoult and E. Lafranche. Analytical and numerical modelling of light scattering in composite transmission laser welding process. International Journal of Material Forming. 8, 127-135. 2015 [DOI]
[ACL5]A.-C. Akue Asseko, B. Cosson, F. Schmidt, Y. Le Maoult and E. Lafranche. Laser transmission welding of composites-Part A: Thermo-physical and optical characterization of materials. Infrared Physics and Technology. 72, 293–299. 2015 [DOI]
[ACL6]J. Vignes, F. Schmidt, G. Dusserre and J.-F. Dalmasso. Numerical simulation of extruded clay paste compression. International Journal of Material Forming. 8, 111-118. 2015 [DOI]
[ACL7]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices, B. Cosson and F. Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes. Polymer Composites. 34(8)1235–1244. 2013 [DOI]
[ACL8]N. Lebaal, F. Schmidt, S. Puissant and D. Schlaefli. An optimization method with experimental validation for the design of extrusion dies for a range of different materials and operating conditions. Polymer Engineering and Science. 52(12)2675–2687. 2012 [DOI]
[ACL9]G. Dusserre, G. Bernhart, F. Schmidt and G. Dour. Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests. Journal of Non-Newtonian Fluid Mechanics. 166(21-22)1229-1238. 2011 [DOI]
[ACL10]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Simulations of an Infrared Composite Curing Process . Advanced Engineering Materials. 13(7)604-608. 2011 [DOI]
[ACL11]F. Schmidt, F. Chinesta, M. Mongeau and N. Pirc. Efficient Mold cooling optimization by using model reduction. International Journal of Material Forming. 4, 73–82. 2011 [DOI]
[ACL12]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices and F. Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method. Applied Mechanics and Materials. 62, 57-65. 2011 [DOI]
[ACL13]B. Cosson, F. Schmidt, Y. Le Maoult and M. Bordival. Infrared heating stage simulation of semi-transparent media (PET) using ray tracing method. International Journal of Material Forming. (4)1–10. 2011 [DOI]
[ACL14]N. Lebaal, F. Schmidt and S. Puissant. Optimisation of extrusion flat die design and die wall temperature distribution, using Kriging and response surface method. International Journal of Materials and Product Technology. 38(2/3)307 - 322. 2010 [DOI]
[ACL15]Y. Ledru, G. Bernhart, F. Schmidt, R. Piquet and L. Michel. Coupled visco-mechanical and diffusion void growth modelling during composite curing. Composites Science and Technology. 70, 2139-2145. 2010 [DOI] [OATAO]
[ACL16]N. Lebaal, F. Schmidt and S. Puissant. Application of a Response Surface Method to the Optimal Design of the Wall Temperature Profiles in Extrusion Die. International Journal of Material Forming. 3(1)47-58. 2010 [DOI]
[ACL17]R. Gantois, A. Cantarel, J.-N. Felices and F. Schmidt. Numerical simulation of Resin Transfer Molding using BEM and Level Set method. International Journal of Material Forming. 3(Suppl 1)635-638. 2010 [DOI]
[ACL18]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Curing simulation of composites coupled with infrared heating. International Journal of Material Forming. 3(Suppl 1)587-590. 2010 [DOI]
[ACL19]M. Bordival, F. Schmidt, Y. Le Maoult and B. Cosson. A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics. International Journal of Material Forming. 3(Suppl 1)809– 812. 2010 [DOI]
[ACL20]B. Cosson, F. Schmidt and Y. Le Maoult. Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method. International Journal of Material Forming. 2(1)267-270. 2009 [DOI]
[ACL21]M. Bordival, Y. Le Maoult and F. Schmidt. Optimization of preform temperature distribution for the stretch-blow molding of PET bottles: Infrared heating and blowing modelling. Polymer Engineering and Science. 49(4)783-793. 2009 [DOI]
[ACL22]N. Lebaal, F. Schmidt and S. Puissant. Design and optimization of three-dimensional extrusion dies, using constraint optimization algorithm. Finite Elements in Analysis and Design. 45, 333 –340. 2009 [DOI]
[ACL23]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta. Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction. International Journal of Material Forming. 2(1)271–274. 2009 [DOI]
[ACL24]N. Lebaal, F. Schmidt, S. Puissant and D. Schlaefli. Design of optimal extrusion die for a range of different materials. Polymer Engineering and Science. 49(3)432-440. 2009 [DOI]
[ACL25]G. Régnier, D. Dray, E. Jourdain, S. Le Roux and F. Schmidt. A simplified method to determine the 3D orientation of an injection molded fiber-filled polymer. Polymer Engineering and Science. 48(11)2159-2168. 2008 [DOI]
[ACL26]N. Pirc, F. Bugarin, F. Schmidt and M. Mongeau. 3D BEM-based cooling-channel shape optimization for injection moulding processes. International Journal for Simulation and Multidisciplinary Design Optimization. 2(3)245-252. 2008 [DOI]
[ACL27]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta. Optimizaton of BEM-based cooling channels injection moulding using model reduction. International Journal of Material Forming. 1(1)1043-1046. 2008 [DOI]
[ACL28]M. Bordival, F. Schmidt and Y. Le Maoult. Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles. International Journal of Material Forming. 1(1)1023-1026. 2008 [DOI]
[ACL29]G. Dusserre, F. Schmidt, G. Dour and G. Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process . Journal of Materials Processing Technology. 162-163, 484-491 . 2005 [DOI]
[ACL30]N. Lebaal, S. Puissant and F. Schmidt. Rheological parameters identification using in situ experimental data of a flat die extrusion . Journal of Materials Processing Technology. 164–165, 1524-1529. 2005 [DOI]
[ACL31]S. Monteix, Y. Le Maoult, F. Schmidt and J.P. Arcens. Quantitative infrared thermography applied to blow moulding process : measurement of a heat transfer coefficient. Quantitative InfraRed Thermography. 1(2)133-150. 2004 [DOI]
[ACL32]F. Schmidt, Y. Le Maoult and S. Monteix. Modelling of infrared heating of thermoplastic sheet used in thermoforming process . Journal of Materials Processing Technology. 143 , 225-231 . 2003 [DOI]
[ACL33]G. Saint-martin, F. Schmidt and P. Devos. Voids in short fibre-reinforced injection-moulded parts: density control vs. mass control . Polymer Testing. 22 (8)947-953. 2003 [DOI]
[ACL34]N. Reuge, F. Schmidt and Y. Le Maoult. Elastomer biaxial characterization using bubble inflation technique. I: Experimental investigations . Polymer Engineering and Science. 41 (3)522-531. 2001 [DOI]
[ACL35]S. Monteix, F. Schmidt and Y. Le Maoult. Experimental study and numerical simulation of preform or sheet exposed to infrared radiative heating . Journal of Materials Processing Technology. 119( 1-3 ) 90-97. 2001 [DOI]
[ACL36]M. Rachik, F. Schmidt and N. Reuge. Elastomer biaxial characterization using bubble inflation technique. II: Numerical investigation of some constitutive models . Polymer Engineering and Science. 41 (3)532-541 . 2001 [DOI]
[ACL37]F. Schmidt, A. Rodriguez-villa and J.F. Agassant. Analytical models for the inflation of a polymeric tube . European Journal of Mechanics, A/Solids. 19 (1)89-104 . 2000 [DOI]
[ACL38]F. Schmidt, P. Lafleur, F. Berthet and P. Devos. Numerical simulation of resin transfer molding using linear boundary element method. Polymer Composites. 20(6)725-732. 1999 [DOI]
[ACL39]F. Deschaux-beaume, F. Schmidt, N. Fréty, T. Cutard, J.-C. Boyer and C. Levaillant. Numerical simulation of failure prediction for ceramic tools: Comparison with forging test results. Journal of Materials Processing Technology. 92(93)502-507. 1999 [DOI]
[ACL40]F. Deschaux-beaume, F. Schmidt and N. Frety. Failure prediction for ceramic dies in the hot-forging process using FEM simulation . Journal of Materials Processing Technology. 75 (1-3)100-110 . 1998 [DOI]
[ACL41]F. Schmidt, J.F. Agassant and M. Bellet. Experimental study and numerical simulation of the injection stretch/blow molding process . Polymer Engineering and Science. 38 (9)1399-1412 . 1998 [DOI]
[ACL42]F. Schmidt, J.F. Agassant and M. Bellet. Viscoelastic simulation of PET stretch/blow molding process . Journal of Non-Newtonian Fluid Mechanics. 64 (1)19-42. 1996 [DOI]

Article de revue avec comité de lecture non répertorié

[ACLN1]A.-C. Akue Asseko, B. Cosson, F. Schmidt, R. Gilblas, Y. Le Maoult and E. Lafranche. Thermal modeling in composite transmission laser welding process: light scattering and absorption phenomena coupling . Key Engineering Materials. 611-612, 1560-1567. 2014 [DOI]
[ACLN2]A. El Bakali , O. De Almeida, J. Bikard, M. Villiere, F. Schmidt, Y. Le Maoult and M. Dauphin. Simulation of IR heating for composite stamping. Key Engineering Materials. 554-557, 1523-1529. 2013 [DOI]
[ACLN3]S. Nakouzi, F. Berthet, Y. Le Maoult and F. Schmidt. Simulations of an Infrared Composite Curing Process. Key Engineering Materials. 554-557, 1517-1522. 2013 [DOI]
[ACLN4]J. Vignes, F. Schmidt, G. Dusserre and J.F. Dalmasso. Effect of moisture on the behaviour of an extruded clay paste. Key Engineering Materials. 554-557, 2230-2236. 2013 [DOI]
[ACLN5]D. Lecointe, M. Villière, S. Nakousi, V. Sobotka, N. Boyard, F. Schmidt and D. Delaunay. Experimental determination and modeling of thermal conductivity tensor of carbon/epoxy composite. Key Engineering Materials. 504-506 , 1091-1096. 2012 [DOI]
[ACLN6]J. Vignes , F. Schmidt, G. Dusserre, O. De Almeida and J.-F. Dalmasso. Numerical simulations of clay tiles compression. Key Engineering Materials. 504-506 , 1403-1408. 2012 [DOI]
[ACLN7]F. Schmidt, S. Nakouzi, Y. Le Maoult, F. Berthet, D. Delaunay and V. Sobotka. Optimization of the incident IR heat flux upon a 3D geometry,composite part (Carbon/Epoxy). Key Engineering Materials. 504-506, 1085-1090. 2012 [DOI]
[ACLN8]R. Gantois, A. Cantarel, J.-N. Felices, N. Pirc and F. Schmidt. BEM Simulation Of 3D Updated Resin Front For LCM Processes. Key Engineering Materials. 446, 131-136. 2010 [DOI]
[ACLN9]M. Guichon, C. Boher, B. Hassoune-rhabbour, F. Schmidt and Y. Baziard. Identification des contraintes de rupture et de cisaillement à l'interface polymère injecté-moule métallique à l'aide du test couronne. Matériaux et Techniques. 96(1-2)65-78. 2008 [DOI]
[ACLN10]S. Hmida-maamar, F. Schmidt, L. Robert, V. Velay and D. Mercier. Identification de paramètres de comportement de membranes en polymères durant le procédé de soufflage. Matériaux et Techniques. 94(5)371-378. 2006 [DOI]
[ACLN11]F. Berthet, P. Devos, F. Schmidt and T. Ansart. Influence des paramètres du procédé et de constitution sur le comportement sous impact et à la résistance en compression après impact. Revue des Composites et des Materiaux Avances. 8, 25-52. 1998

Communication avec actes dans un congrès international ou national

[ACT1]T. Baumard, G. Menary, O. De Almeida, F. Schmidt, P. Martin and J. Bikard. Towards a Coupled Heating-Forming Simulation of the Thermoforming of Thermoplastic Composites. Proceedings of 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING 2017
[ACT2]S. Boztepe, R. Gilblas, O. De Almeida, F. Schmidt and Y. Le Maoult. The role of microcrystalline structure on the temperature-dependent thermo-optical properties of semi-crystalline thermoplastics and non-invasive temperature measurements . Proceedings of 25ème Congrès Français de Thermique (SFT) 2017
[ACT3]S. Boztepe, R. Gilblas, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. Proceedings of 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING 2017
[ACT4]S. Boztepe, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT5]T. Baumard, O. De Almeida, G. Menary, Y. Le Maoult, F. Schmidt and J. Bikard. Determination of Thermal Contact Conductance in Vacuum-Bagged Thermoplastic Prepreg Stacks Using Infrared Thermography. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT6]A.C. Akué Asseko, E. Lafranche, B. Cosson, F. Schmidt and Y. Le Maoult. Infrared welding process on composite: Effect of interdiffusion at the welding interface. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT7]M. Dauphin, S. Albin, C. Roucoules, Y. Le Maoult, M. El Hafi and F. Schmidt. Modélisation des échanges radiatifs dans un système d’éclairage automobile par la méthode de Monte-Carlo. Proceedings of SFT 2013
[ACT8]M. Dauphin, S. Albin, M. El Hafi, Y. Le Maoult and F. Schmidt. Towards thermal model of automotive lamps. Proceedings of 11 international conference on Quantitative Infrared Thermography 2012
[ACT9]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. simulation de la polymèrisation par infra rouge de composites. Proceedings of SFT 2011, 24-27 mai 2011, perpignan 2011
[ACT10]F. Berthet, S. Nakouzi, F. Schmidt and Y. Le Maoult. Cartes de température maximum lors de la simulation de la réticulation de la résine RTM 6 dans une plaque composite. Proceedings of JNC 17 (Journées nationales des composites) 2011 [HAL]
[ACT11]S. Nakouzi, F. Schmidt, Y. Le Maoult, F. Berthet and J. Pancrace. Infrared curing simulations of liquid composites molding. Proceedings of 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS p.1125-1130 2011 [DOI]
[ACT12]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Curing simulation of composites coupled with infrared heating. Proceedings of ESAFORM CONFERENCE 7-9 april 2010 brescia italy 2010
[ACT13]M. Bordival, B. Cosson, Y. Le Maoult and F. Schmidt. A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics. Proceedings of 13th ESAFORM CONFERENCE ON MATERIAL FORMING 2010
[ACT14]R. Gantois, A. Cantarel, J.-N. Felices and F. Schmidt. Numerical simulation of Resin Transfer Molding using BEM and Level Set method. Proceedings of 13th ESAFORM CONFERENCE ON MATERIAL FORMING 2010
[ACT15]J. Pancrace, P. Lamesle, E. Rodier, F. Schmidt, Y. Le Maoult and F. Berthet. 2209 - Evolution de la microstructure et influence de la pollution atmosphérique lors de la mise en oeuvre d'une résine thermodurcissable . Proceedings of Matériaux 2010 p.9p 2010
[ACT16]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and P. Chinesta. Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction, . Proceedings of 12th ESAFORM CONFERENCE ON MATERIAL FORMING 2009
[ACT17]B. Cosson, Y. Le Maoult and F. Schmidt. Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method. Proceedings of 12th ESAFORM CONFERENCE ON MATERIAL FORMING 2009
[ACT18]Y. Ledru, L. Michel, R. Piquet, F. Schmidt and G. Bernhart. Quantification 2-D et 3-D de la porosité par analyse d’images dans les matériaux composites stratifiés aéronautiques 2-D and 3-D - void quantification with image analyse s in aeronautic composite laminates . Proceedings of JNC 16 2009
[ACT19]R. Gantois, A. Cantarel, J.-N. Felices, N. Pirc and F. Schmidt. BEM simulation of 3D updated resin front for LCM processes. Proceedings of International Conference on Structural Analysis of Advanced Materials 2009
[ACT20]N. Lebaal, F. Schmidt, S. Puissant and D. Schläfli. Application of a Response Surface Method to the optimal design of the wall temperature profiles in extrusion die. Proceedings of International Conference on advances in materials and processing technologies (AMPT) 2008
[ACT21]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Modeling of voids growth mechanisms during manufacturing composites laminates”, . Proceedings of FPCM-9, 9th International Conference on Flow Processes in Composite Material 2008
[ACT22]N. Lebaal, F. Schmidt, S. Puissant and D. Schläfli. Optimization of coat-hanger melt distributors for the wire coating process. Proceedings of Proceedings of the Polymer Processing Society 24th Annual Meeting, PPS-24 2008
[ACT23]M. Bordival, F. Schmidt and Y. Le Maoult. Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles”, . Proceedings of 11th ESAFORM CONFERENCE ON MATERIAL FORMING 2008
[ACT24]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and P. Chinesta. Optimization of BEM-based Cooling Channels Injection Moulding Using Model Reduction. Proceedings of International Journal of Material Forming 2008 [DOI]
[ACT25]L. Robert, S. Hmida-maamar, V. Velay and F. Schmidt. Determination of the elongational properties of polymers using a mixed numerical-experimental method. Proceedings of International Conference on Experimental Mechanics (ICEM'13), Alexandroupolis, Greece p.667-668 2007 [DOI]
[ACT26]N. Lebaal, F. Schmidt and S. Puissant. Optimizations of coat-hanger die, using constraint optimization algorithm and Taguchi method. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes p.537-544 2007
[ACT27]M. Bordival, F. Schmidt, Y. Le Maoult and V. Velay. Simulation of the two stages Stretch-Blow Molding Process. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes 2007
[ACT28]N. Pirc, F. Schmidt, F. Bugarin and M. Mongeau. Cooling Channel Optimisation for injection molding. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes 2007
[ACT29]V. Velay, L. Robert, F. Schmidt, S. Hmida and T. Vallet. Behaviour model identification based on inverse modeling and using optical full field measurements (offm): application on rubber and steel. Proceedings of 10th Esaform Conference On Material Forming p.33-38 2007 [DOI]
[ACT30]M. Bordival, F. Schmidt and Y. Le Maoult. Numerical Modelling and Optimization of Infrared Heating System for the Blow Moulding Process. Proceedings of 9th ESAFORM CONFERENCE ON MATERIAL FORMING 2007
[ACT31]N. Lebaal, S. Puissant and F. Schmidt. Optimization of 3D die extrusion using response surface method. Proceedings of 9th International Conference on Material Forming ESAFORM p.703-706 2006
[ACT32]M. Bordival, F. Schmidt, Y. Le Maoult and E. Coment. Measurement of Thermal Contact Resistance Between The Mold And The Polymer For The Stretch-blow Molding Process. Proceedings of 10th ESAFORM CONFERENCE ON MATERIAL FORMING 2006
[ACT33]N. Lebaal, S. Puissant and F. Schmidt. Identification des paramètres rhéologique à l'aide d'une méthode d'optimisation appliquée à l'extrusion en 3D. Proceedings of XVIIe Congrès Français de Mécanique 2005
[ACT34]M. Guichon, C. Boher and F. Schmidt. An Understanding of Polymer/Mold Contact during Injection Moulding Cycle. Proceedings of PPS-2005: America Regional Meeting 2005
[ACT35]M. Bordival, F. Schmidt, Y. Le Maoult and C. Champin. Optimisation of infrared heating system for thermoforming and blow molding processes. Proceedings of PPS-2005: America Regional Meeting 2005
[ACT36]G. Dusserre, F. Schmidt, G. Dour and G. Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process. Proceedings of 8th International Conference on Advances in Materials and Processing Technologies 2005
[ACT37]N. Lebaal, S. Puissant and F. Schmidt. Rheological parameters identification using in-situ experimental data of a flat die extrusion . Proceedings of 8th International Conference on advances in materials and processing technologies 2005
[ACT38]C. Champin, M. Bellet, F. Schmidt, J.-F. Agassant and Y. Le Maoult. 3D Finite Element Modelling of the Stretch Blow Moulding Process. Proceedings of 8th ESAFORM CONFERENCE ON MATERIAL FORMING p.905-908 2005
[ACT39]S. Andrieu, F. Schmidt, Y. Le Maoult and S. Monteix. Optimisation of Infrared Heating for the thermoforming process. Proceedings of 8th ESAFORM CONFERENCE ON MATERIAL FORMING 2005
[ACT40]S. Monteix, Y. Le Maoult and F. Schmidt. Quantitative Infrared Thermography applied to blow moulding process: measurement of a heat transfer coefficient. Proceedings of QUIRT 2004 2004
[ACT41]S. Andrieu, F. Schmidt and Y. Le Maoult. Infrared heating modelling of thermoplastic sheet during thermoforming process. Proceedings of 20th International Conference of Polymer Processing Society 2004
[ACT42]E. Mathey, L. Penazzi, F. Ronde-oustau and F. Schmidt. Automatic optimization of the cooling of injection mould based on the boundary element method. Proceedings of 8th International Conference on Numerical Methods in Industrial Forming Processes 2004
[ACT43]C. Champin, J.-F. Agassant, M. Bellet, F. Schmidt and Y. Le Maoult. 3D Finite Element Modelling of the Stretch-Blow Moulding Process. Proceedings of 20th International Conference of Polymer Processing Society 2004
[ACT44]S. Andrieu, F. Schmidt and Y. Le Maoult. Mesures infrarouges appliquées à la modélisation du thermoformage EMAC. Proceedings of Colloque photomécanique 2004 p.177-184 2004
[ACT45]S. Andrieu, F. Schmidt and Y. Le Maoult. Heat conditioning modelling of thermoforming process: comparison with experiments. Proceedings of 19th International Conference of Polymer Processing Society 2003
[ACT46]E. Mathey, L. Penazzi, F. Schmidt and F. Ronde-oustau. Numerical Simulations of Polymer Cooling in Laminated Injection Moulds. Proceedings of 6th ESAFORM 2003
[ACT47]E. Jourdain, F. Schmidt, G. Saint-martin and E. Haramburu. Fiber Orientation of Meldlines in Injection Molding of Short Fiber Reinforced Thermoplastic: A quantitative Comparison of Experimental and Numerical Results. Proceedings of 6th ESAFORM 2003
[ACT48]S. Andrieu, Y. Le Maoult and F. Schmidt. Infrared Heating Modeling of Thermoplastic Sheets in Thermoforming Process. Proceedings of 18th International Conference of Polymer Processing Society 2002
[ACT49]I. Busuladzic, F. Schmidt and P. Lafleur. Dispersive prediction of single-screw extruder with mixing head using Boundary Element Method. Proceedings of 18th International Conference of Polymer Processing Society 2002
[ACT50]G. Saint-martin, F. Schmidt, P. Devos and C. Levaillant. Advanced controls and measurements for the injection molding of a short fiber reinforced polymer. Proceedings of 18th International Conference of Polymer Processing Society 2002
[ACT51]E. Haramburu, F. Collombet, B. Ferret, J.-S. Vignes, P. Devos, C. Levaillant and F. Schmidt. Short-fibre Reinforced Thermoplastic for Semi-structural Parts: Process-properties. Proceedings of 8th Euro-Japanese Symposium 2002
[ACT52]F. Schmidt and Y. Le Maoult. Modeling of Infrared Heating of Thermoplastic Sheet Used in Thermoforming Process. Proceedings of International Conference on Advances in Materials And Processing Technologies 2001
[ACT53]S. Monteix, F. Schmidt, Y. Le Maoult, G. Denis and M. Vigny. Recent Issues In Preform Radiative Heating Modelling. Proceedings of 17th International Conference of Polymer Processing Society 2001
[ACT54]S. Monteix, F. Schmidt, Y. Le Maoult, G. Denis and M. Vigny. Comparison Between a Numerical Model and an Experimental Approach of Preform Infrared Radiative Heating. Proceedings of CHT’01 (International Symposium on Advances in Computational Heat Transfer) p.1017-1024 2001
[ACT55]M. Rachik, F. Schmidt, N. Reuge, Y. Le Maoult and F. Abbé. Elastomer Biaxial Characterization, Experimental an Numerical Investigations . Proceedings of Eccomas 2000 2000
[ACT56]S. Monteix, F. Schmidt and Y. Le Maoult. EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF PREFORM INFRARED RADIATIVE HEATING . Proceedings of Quantitative Infrared Thermography, QIRT’2000 2000 [DOI]
[ACT57]F. Schmidt, S. Monteix and Y. Le Maoult. Analysis of influent parameters during infrared radiative heating of PET preform. Proceedings of 16th International Conference of Polymer Processing Society 2000
[ACT58]S. Monteix, F. Schmidt, Y. Le Maoult, R. Ben Yedder, R. Diraddo and D. Laroche. Experimental Study and Numerical Simulation of Preform or Sheet Infrared Radiative Heating. Proceedings of AMPT ‘99 1999
[ACT59]F. Schmidt, N. Reuge, Y. Le Maoult, J.-P. Arcens, B. David and F. Abbé. Inflation Technique Optimization for an Elastomer Biaxial Characterization. Proceedings of 15th International Conference of Polymer Processing Society 1999
[ACT60]S. Monteix, R. Diraddo, F. Schmidt and Y. Le Maoult. Profiled infrared radiative heating in blow moulding and thermoforming. Proceedings of PPS’98 - North American Meeting p.147-148 1998
[ACT61]F. Schmidt, F. Berthet, P. Devos and P. Lafleur. Numerical simulation of RTM using boundary element method. Proceedings of 6th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 98) p.453-457 1998
[ACT62]Y. Le Maoult, F. Schmidt, M. El Hafi and P. Lebaudy. Measurement and Calculation of Preform Infrared Heating a first approach. Proceedings of 4th International Workshop on Advanced Infrared Technology and Applications p.321-331 1997
[ACT63]F. Schmidt, J.-F. Agassant and M. Bellet. Experimental Study of the injection stretch/blow molding process. Proceedings of ANTEC ‘97, Society of Plastics Engineers 1997
[ACT64]V. Laborde, M. El Hafi, Y. Le Maoult and F. Schmidt. 11) V. Laborde , M. , P. Lebaudy, Y. Le Maoult, F. M. Schmidt, “Modélisation du chauffage infra rouge de préformes”. Proceedings of Société Française des Thermiciens ‘97 p. 699-706, 1997
[ACT65]F. Deschaux-beaume, F. Schmidt, N. Fréty, T. Cutard, J.-C. Boyer and C. Levaillant. Numerical simulation of failure prediction for ceramic tools: Comparison with forging test results. Proceedings of International Conference "Advances in Materials and Processing Technologies '97" - Guimaraes (Portugal). 1997
[ACT66]F. Schmidt, J.-F. Agassant and M. Bellet. Analytic Models for the Simultaneous Inflation and Extension of a Polymeric Tube. Proceedings of 12th International Conference of Polymer Processing Society 1996
[ACT67]F. Schmidt, J.-F. Agassant, M. Bellet and L. Desoutter. Viscoelastic Simulation of P.E.T Stretch/Blow Molding Process. Proceedings of 10th International Conference of Polymer Processing Society p.313-314 1994
[ACT68]F. Schmidt, J.-F. Agassant, M. Bellet and L. Desoutter. Viscoelastic Simulation of P.E.T Stretch/Blow Molding. Proceedings of 9th International Conference of Polymer Processing Society p.335-336 1993
[ACT69]F. Schmidt, J.-F. Agassant, M. Bellet and G. Denis. Numerical Simulation of Polyester Stretch/Blow Molding Process. Proceedings of 4th International Conference on Numerical Methods in Industrial Forming Processes p.383-388 1992

Communication sans actes dans un congrès international ou national

[COM1]F. Schmidt and Y. Le Maoult. Infrared Radiation applied to Blow Molding Process. 32nd International Conference of the POLYMER PROCESSING SOCIETY 2016
[COM2]S. Boztepe, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. 32nd International Conference of the POLYMER PROCESSING SOCIETY 2016
[COM3]M.Q. Thai, F. Schmidt, G. Dusserre, A. Cantarel and L. Silva. Micro-scale modeling of resin flow by BEM- Permeability computation. International conference on COmputational methods in Manufacturing Processes 2014
[COM4]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices and F. Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method . ACMA 2010 - International symposium on composites and aircraft materials 2012
[COM5]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Voids growth mechanisms during manufacturing of aeronautical composite laminates”. 3ème congrès Rotomoulage, Thermoformage et Soufflage 2009
[COM6]M. Bordival, Y. Le Maoult and F. Schmidt. Thickness Optimisation of Inflated Preforms by Varying Infrared Heatong Coefficients. 3ème congrès Rotomoulage, Thermoformage et Soufflage 2009
[COM7]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Voids growth mechanisms during manufacturing of aeronautical composite laminates. First Japanese-French Joint Workhop (EMAC-Tohoku University-INSA) 2008
[COM8]G. Bernhart, T. Cutard, Y. Le Maoult, F. Schmidt and J.-P. Arcens. Infra-red sheet heating assisted Superplastic Forming.. EuroSPF2008, 7th European Conference on Superplastic Forming, Carcassone (France) 2008 2008
[COM9]S. Hmida-mamaar, F. Schmidt, L. Robert, V. Velay and L. Chevalier. Identification du Comportement de Membranes en Polymères par Analyse Inverse au cours du Procédé de Soufflage. 2ème congrès Rotomoulage, Thermoformage et Soufflage 2007
[COM10]M. Bordival, Y. Le Maoult and F. Schmidt. Optimisation de l’Etape de Chauffage du Procédé de Soufflage de Bouteilles en Plastiques. 2ème congrès Rotomoulage, Thermoformage et Soufflage 2007
[COM11]S. Hmida-maamar, F. Schmidt, L. Robert and V. Velay. Parameters Identification using Field Measurements of Polymer Membranes during Bubble Inflation Technique. Photomechanics 2006, Clermont-Ferrand (France), 10-12 July 2006
[COM12]M. Bordival, F. Schmidt and Y. Le Maoult. Optimisation numérique des systèmes de chauffage infrarouge pour le thermoformage et l’injection-soufflage . 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM13]F. Schmidt, C. Champin, Y. Le Maoult and M. Bellet. Modélisation de l’étape de chauffage IR dans les procédés de soufflage et thermoformage. 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM14]S. Hmida, F. Schmidt, L. Robert, V. Velay and D. Mercier. Modélisation du comportement de membranes en polymères durant le procédé de soufflage. 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM15]N. Lebaal, S. Puissant, F. Schmidt and D. Schlaefli. Déterminations des paramètres d’une loi de viscosité pseudoplastique à l’aide de mesures sur une filière d’extrusion . 9ème Journée de la Matière Condensée 2004
[COM16]G. Régnier, X. Bardet, D. Dray, E. Jourdain, F. Schmidt and S. Le Roux. Measurements of the full 3D orientation tensor of an injection molded fiber-filled polymer. Europe-China Symposium on Reinforced Polymers 2004
[COM17]S. Monteix, Y. Le Maoult, F. Schmidt and J.-P. Arcens. Thermographie Infrarouge Appliquée à la Mise en Forme des Bouteilles en P.E.T. Thermogram 2001 2001
[COM18]S. Monteix, F. Schmidt, Y. Le Maoult and J.-P. Arcens. Modélisation du chauffage infra rouge de préformes en PET. IVème Colloque Franco-québécois, École Polytechnique de Montréal 1999
[COM19]N. Feraud, F. Schmidt and C. Levaillant. 3D Simulation of Gob Transfer in the Delivery System on a Glass Bottle Production Machine. International User’s Conference of Abaqus 1996
[COM20]F. Schmidt, J.-F. Agassant, M. Bellet and L. Desoutter. Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T.. Colloque National GFP 1992
[COM21]F. Schmidt, J.-F. Agassant, M. Bellet and G. Denis. Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T.. Colloque National Matériaux: Science et industrie 1992

Communication par poster dans un congrès international ou national

[AFF1]T. Cutard, F. Deschaux-beaume, C. Colin, F. Schmidt and C. Levaillant. Développement d'outillages à base de matériaux céramiques pour la mise en forme de métaux à haute température. Colloque sur Les Propriétés d'Usage des Réfractaires - Nancy (France) - Juin 1999. 1999

Chapitre d'ouvrage scientifique

[OSC1]F. Schmidt and Y. Le Maoult. Infrared Radiation Applied to Polymer Processes . In book Heat Transfer in Polymer Composite Materials: Forming Processes, Chap. 13, p.385. Ed. Wiley-ISTE. 2016 ISBN:978-1-84821-761-4
[OSC2]F. Chinesta and F. Schmidt. On the Use of Reduced Bases in Optimization of Injection Molding. In book Optimization in Polymer Processing , Chap. 8, p.169-194. Ed. Nova Science Publishers. 2011

Thèse de Doctorat ou HdR

[TH1]F. Schmidt. Modélisation dans les procédés de mise en forme des polymères. Habilitation à diriger des recherches, « Energétique, Génie des Procédés » à l’Université de Pau et des Pays de l’Adour. 2001
[TH2]F. Schmidt. Étude expérimentale et modélisation du procédé d’injection soufflage bi-orientation en cycle froid de bouteilles en P.E.T. Thèse de doctorat, Sciences et Génie des Matériaux à l’école Nationale Supérieure des Mines de Paris. 1995



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80